Hot Tub Cleaning Chemicals

1ltr

This non abrasive liquid cleaner is specifically formulated for the internal surfaces of hot tubs.

Its easy to apply using a sponge or cloth. You need to make sure the surface is wet, then gently apply it, leave it for a couple of minutes and then rinse. Its used to remove oils and greases around the spa waterline and should be used to clean the whole of the internal surface every time the hot tub is drained and refilled.

1ltr

This cleaner fluid removes oils & greases that gradually accumulate on filter cartridges, and consequently impair the performance of the filter.

Cleaning the cartridge using this product restores the efficiency of the filter, and thus extending their lifespan.

100g

This convenient 100g sachet is the ideal product to clean filter cartridges.

Add one Immerse sachet into a clean plastic bucket containing clean water and stir well. hose the cartridge to remove any loose debris, and then soak it in the cleaning solution for at least eight hours. After soaking the cartridge rinse it thoroughly with fresh water.

0.5ltr

This is a water clarifier in liquid form that can be used with all types of filtration systems.

Its purpose is to collect any small particles and bind them together, producing larger larger particles that are much easier for the filter to remove.

Regular small doses of this product are all that are required to keep spa water looking crystal clear.

1ltr

As above but in a larger quanity.

0.5ltr

Scale Away will prevent and remove scale deposits caused by mineral precipitation, which can build up on the surface of hot tubs due to the relatively high water temperatures.

1ltr

As above but in a larger quantity.

0.5ltr

If soaps, oils or maybe cosmetics are allowed to build up in the water, they will eventually create foaming. The simple addition of Spa Foam Away will eliminate unwanted foam from the water surfaces. If it the foaming is excessive though, the hot tub spa should be drained and refilled.

1ltr

As above but in larger quantity.

473ml

Spa flush is used just prior to draining down the hot tub.

Its purpose is to remove any build up of soap & oil deposits in the plumbing underneath a hot tub.

8oz

This protectant is widely used in many industries, its also particularly suited to protecting vinyls and fiberglass gelcoats, providing powerful UV screening protection. On previously untreated surfaces such as vinyl it restores lost colour and luster.